
Decrease set up peak, extra design freedom: New TECEprofil bathroom module brings washbasin and bathroom to at least one degree.
Countertop washbasins are highly regarded, particularly in motels and eating places, due to their upscale aesthetics. What is agreeable to the attention, nevertheless, is a problem for the installer: as a result of it’s usually essential to combine the washbasin in a joint development with the bathroom by way of design, whereas sustaining the same old utilization peak. The development peak of typical bathroom modules is often not appropriate for this objective. That is completely different with the brand new TECEprofil bathroom module, which, with an set up peak of solely 750 mm, affords the perfect stipulations for a joint design of washbasin and bathroom on the similar utilization degree.
How excessive a washbasin is positioned is often left to the planner and is oriented in direction of the long run consumer. The rule VDI 6000 Sheet 1 due to this fact recommends a peak of between 85 and 95 cm; in observe, the rule of thumb of putting in the washbasin at half the peak of the physique has confirmed to be efficient. In motels, the peak is outlined in keeping with DIN 68935 and is 90 cm, measured to the higher fringe of the washbasin. With a traditional countertop washbasin and the bottom TECEprofil bathroom module to this point, with an set up peak of 820 mm, this utilization peak is rapidly exceeded.
So as to present planners and installers with a tailored answer for this utility, TECE has developed the brand new TECEprofil bathroom module with 750 mm set up peak. In comparison with the 820 mm module, the brand new module saves an entire 70 mm on the cistern head, because of a shorter drain valve, amongst different issues, and with out compromising on performance and ease of set up. This makes it attainable to plan and set up countertop washbasins on the proper peak on half-height pre-wall installations.
Common cistern with excessive efficiency and simple set up
The TECEprofil bathroom module works with the brand new Uni 750 cistern, which has the identical intelligent product particulars because the bigger variations (1120, 980 and 820 mm). These embody the sensible set up tunnel with tool-free zip operate, the time-saving straightforward match system for fast set up of the flush plate and the site-safe bathroom connection field, by which the threaded rods, empty pipe and socket are safely saved. With the TECEprofil bathroom module, the cistern is optimally geared up for set up within the TECEprofil pre-wall system, in metallic or wood stud frames, and for set up in entrance of a stable or light-weight wall. The Uni 750 cistern will not be solely utterly pre-assembled ex works, however can be reliably protected in opposition to constructing website filth in the course of the shell development part because of its sealant.
The Uni 750 cistern is actuated from above. Like the opposite TECE common cisterns, the brand new low model is appropriate with all handbook and pneumatic flush plates, giving the planner full design freedom in entrance of the wall.
Right here you will discover extra Data.